Large Power Common Mode Choke Air Coil

High Current Induction Flat Wire air Coil

Conductor air coils are used in various applications, including electromagnets, transformers, inductors, and electric motors. The magnetic field produced by the coil can attract or repel nearby magnetic materials or induce a voltage in nearby...

Common Mode Cooper Coil Power Inductor for Adaptors

CMC (common mode choke) inductor is an electronic component used to suppress electromagnetic interference (EMI) in electrical circuits. It is designed to filter out common mode noise, which is noise that appears on both the supply and return lines...

choke coil filter inductor reactor 33mh

The filter inductor is typically made of a coil of wire wound around a core made of a magnetic material such as iron or ferrite. The number of turns in the coil and the core material determine the inductance value of the filter inductor. Inductance:...

Uu Series filter Inductor for DC power supply

The UU filter inductor is usually placed in series with the load or in parallel with a capacitor to form a LC filter. This combination helps to smooth out the output voltage by reducing the ripple caused by the alternating current. Inductance:...

Common Mode Choke Power Inductor Coil

Conductor air coils are used in various applications, including electromagnets, transformers, inductors, and electric motors. The magnetic field produced by the coil can attract or repel nearby magnetic materials or induce a voltage in nearby...

1.0mH 0.2A Through-hole air Coil Inductor

The inductance of an air coil is determined by factors such as the number of turns, the diameter and length of the wire, and the spacing between the turns. By adjusting these parameters, the inductance of the coil can be controlled to meet specific...

Toroid Choke Coil Inductor for Automatic Control

An inductor is a passive electronic component that stores energy in the form of a magnetic field. It is typically made of a coil of wire wound around a core material, such as iron or ferrite. When current flows through the coil, a magnetic field is...

Hot product new product compass antenna magnetic coil

A transmitting antenna coil is a type of coil used in radio frequency (RF) transmitting systems to generate and radiate electromagnetic waves. It is typically made of copper wire wound around a cylindrical or helical core. The coil is connected to a...

customized transmitting antenna coil for Automobiles

The transmitting antenna coil is typically made of copper wire wound around a core material, such as ferrite or air. The number of turns in the coil and its size can vary depending on the specific application and desired performance. Transmitting...

power transmission line coil transformer with housing

The transmitting antenna transformer consists of a few turns of wire wound around a ferrite core. The number of turns and the core material are selected to achieve the desired impedance transformation. The transformer may also include additional...

EMI power common mode coil inductor

The EMI common mode rejection coil is typically placed in-line with power or signal lines to filter out common mode noise. It consists of two or more coils wound around a common magnetic core. The windings are designed to have equal inductance and...

Toroidal Common Mode Choke Coil

EMI common mode rejection coils are commonly used in automotive applications, such as in power supply lines for electronic control units (ECUs), audio systems, and communication systems. They help to improve the reliability and performance of these...